DOI : https://doi.org/10.62527/ijasce.5.3.176

Defilement of Oil Quality of Final Drive Rear Right Excavator in Eleven-Ton Class Heavy Equipment Due to The Component Wear and Visualization on Website

Rino Sukma (1), Nofriyandi (2), Guswandri (3), Rahmi Putri Kurnia (4)
(1) Department of Mechanical Engineering, Politeknik Negeri Padang
(2) Department of Mechanical Engineering, Politeknik Negeri Padang
(3) Department of Mechanical Engineering, Politeknik Negeri Padang
(4) Department of Information Technology, Politeknik Negeri Padang
Fulltext View | Download
How to cite (IJASEIT) :
Sukma, R., Nofriyandi, Guswandri, & Kurnia, R. P. (2023). Defilement of Oil Quality of Final Drive Rear Right Excavator in Eleven-Ton Class Heavy Equipment Due to The Component Wear and Visualization on Website. International Journal of Advanced Science Computing and Engineering, 5(3), 269–277. https://doi.org/10.62527/ijasce.5.3.176
Citation Format :
This research is part of the knowledge and skills of the S.O.S Scheduled Oil Sampling program conducted inPreventive Maintenance practical course in the distribution curriculum of D3 Heavy Equipment Engineering Study Program of Padang State Polytechnic[9]. Laboratory S.O.S Oil is a labor that could see the characteristics of the final drive oil completely, that the quality of the oil used to lubricate the system in final drive can be known as the condition of final drive. Data from S.O.S Oil Laboratory can be used as a reference in conducting in-depth analysis by engineer related to the condition of machine’s final drive. If the condition of the final drive can be known due the operation, it will ease the heavy equipment technicians to perform Preventive Maintenance. The writer’s current research will focus first on the analysis of oil quality defilement caused by wear of the components of final drive. The inner components of the final drive which streamed by lubricant are highly could cause wear and tear by friction between the materials operating in the   final drive’s working system[5]. The oil on the final drive has specifications or properties that would affect final drive performance. The oli used in final drives uses single gread oils such as S.A.E 50, which are applied to final drives of   eleven-ton excavators[6]. The wear of components in the final drive will be seen from the quality of the final drive oil, if the wear occurs is greater, the  work of anti-wear  additives on the oil  is begins to decrease that there must be a solution and analysis obtained. Test results will be obtained based on test data from the S.O.S.  Laboratory.  The Laravel framework with Model-View-Controller (MVC) architecture is used to create this website for visualization the result.

Cooperative Education Program, "Intermediate Power Train System" (2014) ; Cileungsi Training Center. PT Trakindo Utama.

ISO 4406 Code Levels Particle Count Range (per ml) Particle Count Range (per ml), PT Trakindo Utama.

Knowledge Brightens. Character Building Brightens Others Lives. "Fundamental System Engine", (2014) ; Training Center Dept. PT Trakindo Utama.

Knowledge Brightens. Character Building Brightens Others Lives. “Fundamental System Power Train”, (2014) ; Training Center Dept. PT Trakindo Utama.

Knowledge Brightens. Character Building Brightens Others Lives. “S.O.S (Schedule OIL Samplin Interpretation)”, hal. 31 (2014) ; Training Center Dept. PT Trakindo Utama.

Nofriyandi R, Guswandri, Rino Sukma, Refnal Marzuki. “Excavator Engine Oil Quality Pollution Eleven Tons Class Heavy Equipment Due To Component Wear.” Jurnal Ilmiah Poli Rekayasa Volume 18, Nomor 1, Oktober 2022.

Oil Laboratory Product Support. “General Limit–Used Oil Viscosity”. Head Office PT Trakindo Utama.

Managing Growth Profitably Through Innovation, “Particulate Contamination”. PT Trakindo Utama

Tim Dosen Prodi Teknik Alat Berat. “Dokumen Kurikulum Program Studi Diploma Tiga Teknik Alat Berat Jurusan Teknik Mesin”. (2022) : Politeknik Negeri Padang.

Udin Permana, Jamal. "Analisis Perbandingan Pemakaian Oli Pelumas Pada Engine Pesawat Terbang Jenis Cfm56-7 Dan Engine Cfm Leap-1b." Jurnal Teknik 10.2 (2021).

Andi Sujadmiko, F.X. Sukidjo, “Analisis Fe Pada Oli Final Drive RH dan LH Unit Hitachi EH5000 dengan Proses Kidney Loop di PT. Kaltim Prima Coal”. (2021) Tugas Akhir Universitas Gadjah Mada.

Rizky Hardiyatul Maulida, Erika Rani, “Analisis Karakteristik Pengaruh Suhu Dan Kontaminan Terhadap Viskositas Oli Menggunakan Rotary Viscometer”. Jurnal Neutrino Vol. 3, No. 1, 2010.

Munson, B. 2003. Mekanika Fluida; Edisi Keempat; Jilid 1. Jakarta: Erlangga

SIS 2.0 (cat.com). 2019/02/26, “Maintenance Interval Schedule” SEBU8038-13

SIS 2.0 (cat.com). 2020/12/17 “Oil Sampling Interval” SEBU6250-32

Muh Anhar, Nely Kurnila, 2018 “Analisa Kerusakan Dan Perawatan Front Final Drive Planetary Gear Backhoe Loader Case 580 Sn”. Jurnal Inovtek Polbeng, Vol. 8, No. 1. Issn 2088-6225, E-Issn 2580-2798.

Randis, Sidi Na’ali. Juni “Analisis Penurunan Unsur Fe Pada Pelumas Final Drive Rh Dan Lh Unit Hd 785-7 Di Pt. Petrosea. Tbk Site Gunung Bayan Kalimantan Timur Dengan Proses Kidney Loop”. Jurnal Teknologi Terpadu No. 1 Vol. 4.

K. Peng, Equipment Management in the Post Maintenance Era. 2012.

Hendro Purwono, Rasma, Reza Febriano Armas, Muhamad Ikshan Ramadhan, Alan Ramadhan, 2023. “Analisa Kebocoran Oli Pada Penggerak Akhir Unit Bulldozer Komatsu D85ESS-2”. Suara Teknik - Journal, Vol. 14, No. 1.

PanaOIL, 2022. “Aplikasi Oli FD-1” PT Pana Oil Indonesia. Jakarta

W. N. WK and E. Pangestu, 2022, “Perancangan Sistem Informasi Akuntansi Persediaan Bahan Baku Daging Berbasis Web Menggunakan Laravel Dan Heidisql Pada Pt. Kirana Semesta Pangan”, J. Tekknologi Inf., Vol. 2, No. 2.

D. Purnama Sari and R. Wijanarko, 2020, “Implementasi Framework Laravel pada Sistem Informasi Penyewaan Kamera (Studi Kasus di Rumah Kamera Semarang),” J. Inform. dan Rekayasa Perangkat Lunak, Vol. 2, No. 1.