Installation and Activation of a Fiber To The Home (FTTH) Network With The Addition of Optical Distribution Point (ODP) Using The Branching Method

Aprinal Adila Asril (1), Yustini (2), Ratna Dewi (3), Silvia Rifka (4), Rikky Vitria (5)
(1) Department of Electronics Engineering, Politeknik Negeri Padang
(2) Department of Electronics Engineering, Politeknik Negeri Padang
(3) Department of Electronics Engineering, Politeknik Negeri Padang
(4) Department of Electronics Engineering, Politeknik Negeri Padang
(5) Department of Electronics Engineering, Politeknik Negeri Padang
Fulltext View | Download
How to cite (IJASEIT) :
Asril, A. A., Yustini, Dewi , R., Rifka , S., & Vitria , R. (2023). Installation and Activation of a Fiber To The Home (FTTH) Network With The Addition of Optical Distribution Point (ODP) Using The Branching Method. International Journal of Advanced Science Computing and Engineering, 5(3), 298–304. https://doi.org/10.62527/ijasce.5.3.183
FTTH is a concept that uses fiber optic networks. In the FTTH optical network, one of the devices is an Optical Distribution Point (ODP). There are 2 methods for installing ODP, namely connecting the direct area cable and branching the main distribution cable or branching. In previous studies, branching was only done from ODC to ONT and Optical Light Source (OLS) as a substitute for OLT, so there is no internet network that customers can directly access using ONT. In this study, the author discusses how to activate FTTH devices from OLT to ONT customers, with a comparison before and after activation using a 1:4 passive splitter. Then the attenuation that can be produced is 28.54. Therefore network activation on ODP Branching is very efficient because the resulting attenuation does not exceed 28dB, which is in accordance with PT Telecommunications ITU-T G.948 standards.

Aprinal A.A, Popy M, Yustini, Putri A.H "Designing a Pigtail Type Single Mode Optical Cable Transmission Attenuation Measurement System", Electron Scientific Journal Sinta 4 11 (Vol 2), 56-62

K. Mardhatillah, A. A. Asril, Yustini and Yulindon, "Analysis of Drop Core Cable Connection Losses on Optical Network Performance in Building G, 3rd Floor, Padang State Polytechnic," Electrode Focus Journal, vol. 7(3), pp. 172 -177, 202

Designing a Fiber Access Network to the Home for Harmony Residence Jangli Housing Using the K-Means Clustering Algorithm. TRANSIENTS, VOL. 8, NO. 2, JUNE 2019, e-ISSN:2685-0206, 8(2), 1–8. https://ejournal3.undip.ac.id/index.php/transient/article/download/23916/pdf.

Afrie and Yuliarman. (2022). Olt1 Journal. 11(2), 156–161.

Albar, R., & Rizki, Z. M. (2020). Analysis of the Effect of Mechanical Splice Techniques and Fiber Optic Splice Fusion on Attenuation (dB) in Pt. Telkom Indonesia Regional I Witel – ACEH The Analysis Of The Effect Of Mechanical And Splice Engineering Splice Fusion Fiber Optic Against Attention (Db) At Pt. Telkom Indonesia Regional I Witel - Aceh. 6(2), 74–79.

Aulia, N., & Nurcahyani, I. (2017). FTTH Design Using Ethernet Passive Optical Network (EPON) at the Network Layer on the Islamic University of Indonesia Campus.

Aulia, S., Fitri, S., & Asril, A. A. (2021). Design and Measurement of Fiber Network Performance to the Home Using Gigabit Passive Optical Network Technology Using the Optisystem Application in Surau Gadang Subdistrict. Amplifier Journal: Scientific Journal of Electrical and Computer Engineering, 11(2), 22–27. https://doi.org/10.33369/jamplifier.v11i2.19079

Di, T., & Inti, P. T. (2017). Design of a Fiber Access Network to the Home (Ftth) Using Gigabit-Capable Passive Optical Network (GPON) Technology in the Sarirasa 3 Area, Ledeng Subdistrict, Cicadap Sarijadi District, Bandung in the Project. 3(2), 1075–1093.

Dwi, W., Hafidudin, & Tatang, W. (2019). At Royal Kopo Bandung Housing Design of Fiber To the Home Access Network Using. 5(2), 1644–1660.

Hanif, I., & Arnaldy, D. (2017). Analysis of Connecting Access Fiber Optic Cables with Backbone Fiber Optic Cables in the Indosat Jabodetabek Area. Multinetics, 3(2), 12.

Ridho, S., Nur Aulia Yusuf, A., Syaniri, A., Nikken Sulastrie Sirin, D., & Apriono, C. (2020). Fiber to the Home (FTTH) Network Design in Housing in Urban Areas. National Journal of Electrical Engineering and Information Technology, 9(1), 94–103.

Santosa, N. H., & F, Y. A. (2022). Terminating and Splicing Fiber Optic Cables at Bts Sub376-Sancasubang. 7(1), 33–41 https://doi.org/10.32897/infotronik.2022.7.1.1429

Silalahi, Y. N. (2023). Use of Fiber Optic Cables. Use of Fiber Optic Cables.

Syahputra, R. R., Bagaswara, M., & Santoso, D. B. (2021). Analysis of Average Attenuation (Loss) in the Ftth Network in Btr Blok O Bekasi. Power Electronics: Journal of Electrical Engineering, 10(2), 80. https://doi.org/10.30591/polektro.v10i2.2586

Yuseliani, R. D. (2022). Addition of an Optical Distribution Point (ODP) Using the Branching Method in the Design of the Fiber To The Home (FTTH) Network in Building G, 3rd Floor, Padang State Polytechnic. Poly Engineering Scientific Journal, 17(2), 58. https://doi.org/10.30630/jipr.17.2.236

Sudrajat, I., Huda, Y., & Faiza, D. (2018). Analysis of Fiber Optic Attenuation on SKSO Performance Using the Link Power Budget Method (case study on the Padang-Bukittinggi link at PT. Telkom Padang). VoteTEKNIKA: Vocational Journal of Electronics and Informatics Engineering, 2(2).

Muliandhi, P., Faradiba, E. H., & Nugroho, B. A. (2020). Analysis of FTTH Network Configuration withMini OLT Devices for Indihome Services at PT. Telkom Access Witel Semarang. Elektrika, 12(1), 7-14

S. Khairunnisa, H. Octavia, V. Veronica and A. A. Asril, "Design of a Transmission Attenuation Measurement System in Single Mode and Multi Mode Optical Cables Due to Bending with a Radius Factor Using OPM and OTDR Measuring Instruments," Journal Poly Engineering Sciences, vol. 15(1), pp. 27-38, 2019

Ketty Siti Salamah, Trie Maya Kadarina, and Zendi Ilmua, "Introduction to Mit Inventor for Students in the North Development Region," J. Abdi Masy., pp. 5–9, 2020.

E. A. W. Sanad, "Utilization of Realtime Database on the Firebase Platform in the Nabire Regency E-Tourism Application," J. Perelit. Enj., vol. 22, no. 1, pp. 20–26, 2019, doi: 10.25042/jpe.052018.04

Electro, p. 1–74, 2021, [Online]. Available at: https://escri.usm.ac.id/detail-C41A-549.html. [15]. R. R. Syahputra, M. Bagaswara, and D. B. Santoso, "Average Attenuation (Loss) Analysis in the Ftth Network in Btr Block O Bekasi," Power Elektron. J. Electro People, vol. 10, no. 2, p 80, 2021, doi:10.30591/polektro.v10i2.2586