Smart, Portable, and Affordable ECG Testing Kit
How to cite (IJASCE) :
The electrical activity of the heart is measured and recorded using an electrocardiogram, often known as an EKG or ECG, which is a basic diagnostic tool in cardiology. Electrodes are applied to the patient's skin during this non-invasive process in order to record the electrical impulses generated during the cardiac cycle. Cardiac arrhythmia signifies an abnormal heart rate or rhythm. When the heart beats too rapidly or irregularly, its pumping efficiency decreases, potentially reducing blood flow to the brain. This can lead to fainting, dizziness, or even death if not promptly addressed. The proposed health monitoring system is a comprehensive, portable solution designed to monitor key cardiovascular indicators—specifically, heart rate and blood oxygen saturation (SpO2)—in real-time. The system integrates two microcontrollers: an Arduino Mega and a NodeMCU. The Arduino Mega is responsible for displaying ECG waveforms on a TFT screen, as well as calculating and displaying the heart rate. This is achieved through an ECG sensor connected to the Arduino, which plots the heart's electrical activity on the display. A potentiometer allows users to set a customizable threshold line on the ECG waveform, which is used to count heartbeats. The heart rate is calculated based on the number of beats detected per second. If the heart rate falls below or rises above the normal range, the system alerts the user by displaying "Bradycardia" or "Tachycardia," respectively. Meanwhile, the NodeMCU module is connected to a MAX30100 sensor, which measures SpO2 levels. The sensor data is wirelessly transmitted to the Arduino Mega, where it is displayed on the TFT screen alongside the ECG data. This dual-functionality system not only provides continuous monitoring of vital signs but also offers immediate feedback on potential heart conditions, making it an essential tool for proactive health management.
W. A. Ware, J. D. Bonagura, and B. A. Scansen, "Electrocardiography," in Cardiovascular Disease in Companion Animals. Boca Raton, FL, USA: CRC Press, 2021, pp. 135–166, doi:10.1201/9780429186639-6.
A. B. de Luna, M. Fiol-Sala, A. Bayes-Genis, and A. Baranchuk, Clinical Electrocardiography: A Textbook. Hoboken, NJ, USA: John Wiley & Sons, 2021.
M. Beck, E. G. Zalis, and M. H. Conover, "Understanding electrocardiography: Physiological and interpretive concepts," Amer. J. Nursing, vol. 73, no. 6, p. 1107, Jun. 1973, doi: 10.2307/3422764.
M. Amini, F. Zayeri, and M. Salehi, "Trend analysis of cardiovascular disease mortality, incidence, and mortality-to-incidence ratio: Results from global burden of disease study 2017," BMC Public Health, vol. 21, no. 1, Feb. 2021, doi:10.1186/s12889-021-10429-0.
R. Jagannathan, S. A. Patel, M. K. Ali, and K. M. V. Narayan, "Global updates on cardiovascular disease mortality trends and attribution of traditional risk factors," Current Diabetes Rep., vol. 19, no. 7, Jun. 2019, doi: 10.1007/s11892-019-1161-2.
Y. Li, G.-Y. Cao, W.-Z. Jing, J. Liu, and M. Liu, "Global trends and regional differences in incidence and mortality of cardiovascular disease, 1990−2019: Findings from 2019 global burden of disease study," Eur. J. Preventive Cardiol., vol. 30, no. 3, pp. 276–286, Dec. 2022, doi: 10.1093/eurjpc/zwac285.
T. Gaziano, K. S. Reddy, F. Paccaud, S. Horton, and V. Chaturvedi, "Cardiovascular disease," in Disease Control Priorities in Developing Countries, 2nd ed. Washington, DC, USA: World Bank Publications, 2006, pp. 645–662.
H. A. El Zouka and M. M. Hosni, "Secure IoT communications for smart healthcare monitoring system," Internet of Things, vol. 13, p. 100036, Mar. 2021, doi: 10.1016/j.iot.2019.01.003.
P. J. Soh, G. A. E. Vandenbosch, M. Mercuri, and D. M. M.-P. Schreurs, "Wearable wireless health monitoring: Current developments, challenges, and future trends," IEEE Microw. Mag., vol. 16, no. 4, pp. 55–70, May 2015, doi:10.1109/mmm.2015.2394021.
U. B. Mahadevaswamy, M. N. Rohith, and U. Tabassum, "Smart portable ECG and SPO2 kit," in Proc. Int. Conf. Recent Adv. Sci. Eng. Technol. (ICRASET), Nov. 2024, pp. 1–6, doi:10.1109/icraset63057.2024.10895148.
S. Patil, K. Thakare, S. Tawari, M. Toshniwal, and R. Tembhurkar, "Real time health monitoring system using AD8232 and MAX30100 sensor with ESP8266," in Lecture Notes in Networks and Systems. Cham, Switzerland: Springer Nature, 2026, pp. 90–102, doi:10.1007/978-3-032-19185-4_8.
M. Celebi, "Portable ECG monitoring device design based on ARDUINO," in Proc. Med. Technol. Congr. (TIPTEKNO), Nov. 2020, pp. 1–4, doi: 10.1109/tiptekno50054.2020.9299238.
D. Sadhukhan, S. Pal, and M. Mitra, "Automated identification of myocardial infarction using harmonic phase distribution pattern of ECG data," IEEE Trans. Instrum. Meas., vol. 67, no. 10, pp. 2303–2313, Oct. 2018, doi: 10.1109/tim.2018.2816458.
K. T. L, S. J, S. S, and P. V, "Deep learning based wearable sensor system for realtime cardiac monitoring and anomaly detection during sleep," in Proc. Int. Conf. Vis. Analytics Data Vis. (ICVADV), Mar. 2025, pp. 1059–1066, doi: 10.1109/icvadv63329.2025.10961011.
A. Alavi et al., "Real-time alerting system for COVID-19 and other stress events using wearable data," Nature Med., vol. 28, no. 1, pp. 175–184, Nov. 2021, doi: 10.1038/s41591-021-01593-2.
B. Veeravalli, C. J. Deepu, and D. Ngo, "Real-time, personalized anomaly detection in streaming data for wearable healthcare devices," in Scalable Computing and Communications. Cham, Switzerland: Springer Int. Publishing, 2017, pp. 403–426, doi:10.1007/978-3-319-58280-1_15.
P. Behki, Lakshita, A. Sharma, A. Bansal, and V. Chawla, "Leveraging IoT for real-time heart rate forecasting and anomaly detection," in Proc. 2nd Int. Conf. Signal Process., Commun., Power Embedded Syst. (SCOPES), Dec. 2024, pp. 1–6, doi:10.1109/scopes64467.2024.10991097.
J. J. Oresko et al., "A wearable smartphone-based platform for real-time cardiovascular disease detection via electrocardiogram processing," IEEE Trans. Inf. Technol. Biomed., vol. 14, no. 3, pp. 734–740, May 2010, doi: 10.1109/titb.2010.2047865.
N. M, N. S, S. S, and S. Mohandass, "An ECG based arrhythmia detector with an emergency alert system," in Proc. 2nd Int. Conf. Electron. Sustain. Commun. Syst. (ICESC), Aug. 2021, pp. 559–564, doi: 10.1109/icesc51422.2021.9532690.
S. Naik, S. Debnath, and V. Justin, "A review of arrhythmia classification with artificial intelligence techniques: Deep vs machine learning," in Proc. 2nd Int. Conf. Emerg. Technol. (INCET), May 2021, pp. 1–14, doi: 10.1109/incet51464.2021.9456394.
M. I. Owis, A. H. Abou-Zied, A.-B. M. Youssef, and Y. M. Kadah, "Study of features based on nonlinear dynamical modeling in ECG arrhythmia detection and classification," IEEE Trans. Biomed. Eng., vol. 49, no. 7, pp. 733–736, Jul. 2002, doi:10.1109/tbme.2002.1010858.
S. Gradl, P. Kugler, C. Lohmuller, and B. Eskofier, "Real-time ECG monitoring and arrhythmia detection using Android-based mobile devices," in Proc. Annu. Int. Conf. IEEE Eng. Med. Biol. Soc. (EMBC), Aug. 2012, pp. 2452–2455, doi:10.1109/embc.2012.6346460.
B. Vuksanovic, "Analysis of human electrocardiogram for biometric recognition using analytic and AR modeling extracted parameters," Int. J. Inf. Electron. Eng., vol. 4, no. 6, 2014, doi:10.7763/ijiee.2014.v4.478.
B. Vuksanovic and M. Alhamdi, "ECG based system for arrhythmia detection and patient identification," in Proc. 35th Int. Conf. Inf. Technol. Interfaces (ITI), Cavtat, Croatia, 2013, pp. 315–320, doi:10.2498/iti.2013.0532.
B. Vuksanovic and M. Alhamdi, "AR-based method for ECG classification and patient recognition," Int. J. Biometrics Bioinf. (IJBB), vol. 7, no. 2, p. 74, 2013.
S. Rege, T. Barkey, and M. Lowenstern, "Heart arrhythmia detection," in Proc. IEEE Virtual Conf. Appl. Commercial Sensors (VCACS), Mar. 2015, pp. 1–7, doi: 10.1109/vcacs.2015.7439569.
L. G, S. T. G, M. R. NR, M. A, M. A, and S. M. S, "Implementation of humanoid robot using Arduino Mega," in Proc. 4th Int. Conf. Smart Technol., Commun. Robot. (STCR), May 2025, pp. 1–6, doi:10.1109/stcr62650.2025.11019191.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.